How do I replace the adhesive strips on my iPhone Duo case?

Emily S. Updated by Emily S.

Your Casely iPhone Duo case holds your phone with slim adhesive strips. When the grip starts to fade, you can fit fresh strips using the spares that came in the box. Watch the video for your case style, then follow the written steps below.

Setting up your case for the first time? See How do I install my iPhone Duo case?

Classic Case

Bold Flex Case

Align Case

What you need

  • Your spare adhesive strips (they come in the box with your case)
  • A 70% alcohol wipe

Case

Strips in the case

Spares in the box

Classic

4 (2 on the top edge, 2 on the bottom)

8, enough for two full changes

Bold Flex

4 (2 on the top edge, 2 on the bottom)

8, enough for two full changes

Align

3 (1 on the top edge, 1 on the bottom, 1 on the outer side)

9, enough for three full changes

Step by step

Step 1: Take the case off and peel out the old strips

  1. Unfold your Duo all the way.
  2. Ease the front half of the case out of its frame, then lift out the camera half.
  3. Peel out the old strips. Lift each one by its end and pull it out slowly.

Step 2: Clean the slots

  1. Wipe each slot with the alcohol wipe.
  2. Wipe away any leftover adhesive on your phone's edges too.
  3. Let everything dry.

Step 3: Fit new strips

  1. Lift a new strip off the sheet by its tab.
  2. Press it firmly into the slot.
  3. Pull the tab to peel off the film.
  4. Do the same for every slot.

Step 4: Put the case back on

  1. Open your Duo part way and seat the camera half of the case first.
  2. Lower the front half, then press along each strip.

That's it. A firm grip, like new.

Tips

  • Keep the rest of your spares somewhere safe for next time.
  • Questions? Email us at help@getcasely.com.

How did we do?

How do I remove my case?

What is the difference between each style case?